Advance Rigger Test Latest Update 2025-2026

Study Guides Aug 27, 2025
Loading...

Loading document viewer...

Page 0 of 0

Document Text

Advance Rigger Test Latest Update 2025-2026 110 Questions and 100% Verified Correct Answers Guaranteed A+

What is meant by the term "two blocking"?

  • Placing blocks under the outrigger beams.
  • The load block contacts the boom point sheaves.
  • Stacking loads on top of one another.
  • The load strikes the boom while swinging. - CORRECT ANSWER: b. The load block
  • contacts the boom point sheaves.

Lifting 20,000 lbs with a 2-leg bridle sling at a 30° horizontal sling angle, what is the force applied to each leg?

  • 10,000 pounds
  • 20,000 pounds
  • 30,000 pounds

d. 40,000 pounds - CORRECT ANSWER: b. 20,000 pounds

In multiple crane lifts using an equalizer beam, the weight of the beam should be

considered:

  • Part of the crane boom
  • Part of the load weight
  • Part of the crane weight

d. A non-factor - CORRECT ANSWER: b. Part of the load weight

What is required if there is a deviation from the lift plan?

  • The supervisor's permission 1 / 3
  • The rigger's permission
  • A new lift plan

d. Mark ups on the existing lift plan - CORRECT ANSWER: c. A new lift plan

On level ground using skids and rollers, what percent of the weight of the load should yield the required line pull as a general rule of thumb?

  • 2%
  • 5%
  • 10%

d. 20% - CORRECT ANSWER: b. 5%

All of the following are results of unbalanced reeving of the hook block EXCEPT:

  • Wear on the sheaves
  • Torque on the boom
  • Wear on the hook

d. Wear on the wire rope - CORRECT ANSWER: c. Wear on the hook

Before a spreader bar or beams can be used they MUST have been:

  • Repainted
  • Used before
  • Tested and approved

d. Upgraded from the previous job - CORRECT ANSWER: c. Tested and approved

When materials are being hoisted to an upper level, a tag line is used to:

  • Help raise the load
  • Help control the load
  • Stop the process 2 / 3

d. Stop material from falling - CORRECT ANSWER: b. Help control the load

Two cranes are lifting 100 tons. If crane A has 40% of the load, how much weight will crane B have on its hook?

  • 60,000 lbs
  • 80,000 lbs
  • 120,000 lbs

d. 240,000 lbs - CORRECT ANSWER: a. 60,000 lbs

To CONFIRM the rated capacity of a specific sling, consult the manufacturer's:

  • Sling chart
  • Website
  • Sling tag

d. Catalog - CORRECT ANSWER: c. Sling tag

OSHA regulations require hook replacement if the opening exceeds what percentage of its original throat opening?

  • 10%
  • 15%
  • 18%

d. 20% - CORRECT ANSWER: b. 15%

At what percentage of increase in length should a chain sling be removed from service?

  • 2%
  • 3%
  • 4%

d. 5% - CORRECT ANSWER: d. 5%

  • / 3

Download Document

Buy This Document

$30.00 One-time purchase
Buy Now
  • Full access to this document
  • Download anytime
  • No expiration

Document Information

Category: Study Guides
Added: Aug 27, 2025
Description:

Advance Rigger Test Latest Update 2025-2026 110 Questions and 100% Verified Correct Answers Guaranteed A+ What is meant by the term "two blocking"? a. Placing blocks under the outrigger beams. b. T...

Get this document $30.00