after completing any training course required by the Texas mold assessment and remediation

EXAM ELABORATIONS Sep 4, 2025
Loading...

Loading document viewer...

Page 0 of 0

Document Text

Texas Mold Assessment Consultant Exam

the Texas mold assessment and remediation rules states that notice signs must be legible from - [ANSWER] 10 feet after completing any training course required by the Texas mold assessment and remediation rules, how long do you have to take and pass the state examination - [ANSWER] 6 months the assigned protection factor (PF) for an N-95 respirator is - [ANSWER] there is no PF rating for an N-95 respirator According to the EPA "mold remediation in schools and commercial buildings" document, the EPA recommends the following for cleanup of books and papers that were damaged with clear water within 24-48 hours - [ANSWER] discard all books and papers, photocopy and discard originals, and freeze or freeze-dry originals when sampling with a spore trap you are usually trying to determine - [ANSWER] identification of viable mild spores which of the following sampling devices would you use to determine respirable and non- respirable viable airborne mold spores? - [ANSWER] air-o-cell cassette according to the Texas mold assessment and remediation rules, if a contractor is working under the exceptions and exemptions subsection and identifies additional mold that affects a total surface area of more than 25 contiguous square feet they shall - [ANSWER] Immediately cease all remediation work and implement emergency containment if necessary according to the Texas mold assessment and remediation rules, a containment area is defined as - [ANSWER] an area that has been enclosed to control the release of mold or mold- containing vapors into the surrounding area a musty odor indoors usually indicates - [ANSWER] microbial growth skin and eye protection during the remediation process is used to protect workers from - [ANSWER] mold toxins and spores, dust mites, and cleaning products according to the Texas mold assessment and remediation rules the required clearance level of mold spores is - [ANSWER] N/A which sampling method would you use to determine both viable and non-viable mold concentrations in the air - [ANSWER] air-o-cell cassette 1 / 3

according to the EPA's "mold remediation in schools and commercial buildings" document, the EPA recommends the following for cleanup for non-porous hard surface areas - [ANSWER] cleaned with detergent solution what is the normal air flow rate an air-o-cell cassette - [ANSWER] 15 liters/minute according to the EPA's "mold remediation in schools and commercial buildings", it is recommended that water damaged cellulose ceiling tiles should be - [ANSWER] discarded what is the normal air flow rate used for an Andersen sampler - [ANSWER] 28.3 liters/minute according to the Texas mold assessment and remediation rules, who can write a mold management plan? - [ANSWER] a licensed mold assessment consultant according to the Texas mold assessment and remediation rules, a mold assessment consultant may perform an assessment to - [ANSWER] collect data for writing a mold assessment report health effects from inhalation of mold spores could be - [ANSWER] Hypersensitivity pneumonitis according to the Texas mold assessment and remediation rules, mold is defined as - [ANSWER] spores, hyphae, mycotoxins, and living or dead fungi according to the Texas mold assessment and remediation rules, the purpose of a mold assessment is to - [ANSWER] determine the sources, locations and extent of mold growth in a building / determine the condition(s) that caused the mold growth / and enable the assessment consultant to prepare a mold remediation protocol according to the Texas mold assessment and remediation rules, a licensed mold assessment company or consultant shall maintain records until - [ANSWER] the company or consultant issues a mold assessment report, management plan, or remediation protocol to a client, if the company or consultant performs. only the initial assessment for the project / the company or consultant issues the final. status report to the client, if a. final status report is issued / and the company or consultant provides the. signed. certificate of mold remediation to a mold remediation contractor or company, if a certificate of mold remediation is provided according to the Texas mold assessment and remediation rules, a post remediation assessment shall determine if - [ANSWER] the work area is free of all visible mold and wood rot / all work has been completed in compliance with the remediation protocol and work plan and meets clearance criteria specified in the protocol according to the Texas mold assessment and remediation rules, notice signs for mold remediation projects must say - [ANSWER] NOTICE: mold remediation project in progress 2 / 3

according to the Texas mold assessment and remediation rules, containment is not required for a contaminated area of less than - [ANSWER] 25 continguous square feet according to the Texas mold assessment and remediation rules, the stop date is defined as - [ANSWER] the date after the date on which final clearance is achieved according to the Texas mold assessment and remediation rules, the start date is defined as - [ANSWER] the date on which the actual remediation begins according to table. 2 of the EPA's "Mold remediation in schools and commercial buildings", it is recommended that a carpeted area of 50 square feet that has mold contamination from clean water should be - [ANSWER] wet vacuumed, HEPA vacuumed or discarded well-sealed plastic bags according to table. 2 of the EPA's "Mold remediation in schools and commercial buildings, the containment recommended for a contaminated area of less than 10 ft.² is - [ANSWER] none according to the Texas mold assessment and remediation rules, notice signs for mold remediation projects must be - [ANSWER] 8 inches by 10 inches in size according to table one of the EPA's mold remediation in schools of commercial buildings, if clean water damage has occurred within 24 hours to 48 hours, it is recommended that cellulose insulation be - [ANSWER] discarded and replaced according to table one of the EPA's mold remediation in schools of commercial buildings, if clean water damage has occurred within 24 to 48 hours is recommended that wallboard (drywall and gypsum) be - [ANSWER] dried in place if no swelling has occurred and seams are intact according to the Texas mold assessment and remediation rules, the minimum PPE for any mold remediation should be - [ANSWER] N-95 respirator According to the Texas mold assessment and remediation rules, an assessor is defined as - [ANSWER] a person who is licensed under this subchapter as a mold assessment technician, mold assessment consultant or mold assessment company according to the Texas mold assessment and remediation rules, if a walking containment is used the Post remediation assessment shall be performed - [ANSWER] while the containment is in place according to the EPA's mold remediation in schools and commercial buildings, the recommended containment type is based on the - [ANSWER] Area of mold growth according to the Texas mold assessment and remediation rules, indoor air is defined as - [ANSWER] any air within the envelope of the building, including air spaces normally occupied by persons in the building, excluding air and attics and crawlspaces that are vented to the outside of the building

  • / 3

Download Document

Buy This Document

$30.00 One-time purchase
Buy Now
  • Full access to this document
  • Download anytime
  • No expiration

Document Information

Category: EXAM ELABORATIONS
Added: Sep 4, 2025
Description:

Texas Mold Assessment Consultant Exam the Texas mold assessment and remediation rules states that notice signs must be legible from - [ANSWER] 10 feet after completing any training course required ...

Get this document $30.00