- | P a g e
BC OWNER BUILDER NEWEST 2025 ACTUAL
EXAM COMPLETE 370 QUESTIONS AND
CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+ ||BRAND
NEW!!
What is the waiting period between 3rd and 4th home owner builder applications?
- 1 year
- 18 months
- 5 years
- 10 years - CORRECT ANSWER -c
Best way to prevent heat loss for slab on grade construction?
- Insulate under the slab
- Heat slab
- Use a non-concrete slab
- Other - CORRECT ANSWER -a
When is it the best to use sanded grout?
- When the slab is smaller
- When gaps between tiles are bigger 1 / 4
- | P a g e
- Never
- Other - CORRECT ANSWER -b
What is the responsibility of owner/builder when the Compliance Officer is on site?
- Stop Work
- Leave a detailed note of compliance measures
- Be present and accompany the officer on site
- Leave the site so they can observe in peace - CORRECT
ANSWER-c
What is the best way to attach drywall with screws?
- Leave slightly protruding
- Flush with the drywall
- Imbed screws into drywall without tearing paper
- Never use screws - CORRECT ANSWER -c
When is tit best to back fill?
- After inspections but before floor is installed
- After inspections and after floor is installed
- Prior to inspection and floor being installed 2 / 4
- | P a g e
- Backfill is no longer used to stabilize foundations -
CORRECT ANSWER -b
If you vary the slop of a drainage pipe what happens to the rate of flow volume?
- Flow increases, volume decreases
- Slope has no effect on flow and drainage
- Flow and volume both increase
- Other - CORRECT ANSWER -c
When does a heat pump have to adhere to lot setbacks?
- If it is placed near a neighbour's window
- Soil around heat pump is compacted therefore increasing
- Depends on local bylaws
- Does not have to adhere to setback rules - CORRECT
noise level
ANSWER-c
What best describes the job of an owner builder when an inspector gets to the site?
- Make sure all work is stopped while he is on site
- Must be there for every inspection and walk around with them 3 / 4
- | P a g e
- Make sure you don't obstruct them from inspecting the work
- Ignore them and continue as normal - CORRECT ANSWER -
c
R value is the capacity of a material to resist what kind of flow?
- Air
- Heat
- Water
- Gas - CORRECT ANSWER -b
What best describes the job of an owner builder when installing a gas fireplace?
- Make sure that the minimum distances are kept from the
- Make sure there is no non-combustible material around the
- Get approval from the safety authority
- Other - CORRECT ANSWER -c
framing
fireplace
Requirements for working on a site using restricted chemicals
- Poison control on site
- WHIMIS/MSDS Documentation
- / 4