CDL B LICENSE TEST 2024 (3 REAL TESTS A
B & C) WITH 150 REAL EXAM QUESTIONS
AND ANSWERS (100% CORRE CT ANSWERS)
CDL B TEST ACTUAL EXAM QUESTIONS
(BRAND NEW!!)
EACH TEST CONTAINS 50 QUESTIONS
Test A
During the skills test, if making a turn that requires a stop, you should:
Skid to a stop.
Stop after the stop line to get a better view.
Allow your vehicle to roll.
Keep the front wheels aimed straight ahead. - ANSWER-Keep the front wheels aimed straight ahead.
A header board is used to:
Allow a driver to see behind them.
Protect the driver from moving cargo.
Provide extra storage capacity. 1 / 4
Prevent the driver from leaving the tractor. - ANSWER-Protect the driver from moving cargo.
When inspecting cargo, the driver should ensure all of the following, except:
That the truck is not overloaded.
That the cargo is balanced.
That the cargo is secured properly.
That the cargo is heavier at the top than the bottom. - ANSWER-That the cargo is heavier at the top than the bottom.
When you leave your vehicle, you should:
Apply the parking brake.
Apply the air brake.
Not apply any brake.
Leave the door open. - ANSWER-Apply the parking brake.
If something is found to be unsafe during a pre-trip inspection, you should: 2 / 4
Continue with the trip and make an appointment with a mechanic after the trip is completed.
Let a more experienced driver use the truck.
Get the issue fixed immediately.
Not use the items found to be unsafe, but may continue driving normally. - ANSWER-Get the issue fixed immediately.
When traveling down a hill:
Your speed will not change.
Your speed will decrease.
Your speed will increase.
You will slow to a stop. - ANSWER-Your speed will increase.
If you are being tailgated, you should:
Drive on the shoulder.
Pull off the roadway. 3 / 4
Drive faster.
Allow the vehicle to pass. - ANSWER-Allow the vehicle to pass.
A driver should stop after a short distance after changing a tire to:
Ensure that the wheel nuts are tight on the newly-changed tire.
Ensure that there is still enough air pressure in the tire.
Ensure that the correct tire was changed.
Ensure that changing one tire did not damage another tire. - ANSWER-Ensure that the wheel nuts are tight on the newly-changed tire.
Dollies equipped with ABS are required to have malfunction lamps located where?
On the rear
On the left side
On the front
On the top - ANSWER-On the left side
- / 4