Certified Playground Safety Inspector CPSI Exam 74

• | Page

Certified Playground Safety Inspector CPSI Exam 74 Questions Questions with Verified Answers, 100% Guarantee Pass Score

Question 1: To be compliant with ASTM 1487, a designer or

manufacturer of playground equipment should

• provide buyers with a parts list for the playground
• install the equipment themselves
• paint all equipment bright colors
• limit equipment height to 6 feet

Correct answer: a. provide buyers with a parts list for the

playground

Question 2: The fish or wedge probe is used to determine

whether or not a hazard exists on

• a partially bounded opening
• a swing chain
• a slide surface
• a climbing rope

Correct answer: a. a partially bounded opening

• | Page

Question 3: Which of the following is correct regarding the

impact-attenuation of surfacing material

• Critical height must equal or exceed fall height
• Fall height must exceed critical height
• Critical height is irrelevant to fall height
• Surfacing must be at least 12 inches thick

Correct answer: a. Critical height must equal or exceed fall

height

Question 4: When evaluating the structural integrity of a support

structure for a swing that appears to be failing, a CPSI should

• hire a licensed professional engineer to certify the integrity of

the equipment

• replace the structure immediately
• ignore the issue unless it collapses
• reinforce it with additional bolts

Correct answer: a. hire a licensed professional engineer to

certify the integrity of the equipment

• | Page

Question 5: Manufacturers of playground equipment must:

• provide the manufacturer's identification of the equipment
• install all equipment on-site
• provide a lifetime warranty
• use only recycled materials

Correct answer: a. provide the manufacturer's identification of

the equipment

Question 6: The majority of injuries associated with playground

equipment result from

• falls to the surface on which the equipment was located
• equipment malfunctions
• collisions with other children
• entrapment hazards

Correct answer: a. falls to the surface on which the equipment

was located

• | Page

Question 7: An opening may present a common crush or shear

hazard only if it

• grabs the 5/8" (16mm) dowel
• is wider than 2 inches
• is located above 48 inches
• has sharp edges

Correct answer: a. grabs the 5/8" (16mm) dowel

Question 8: The criteria for unitary surface materials includes

meeting requirements of

• ASTM F1292 and F1487
• ASTM F2223 and F1951
• ASTM F2049 and F2223
• ASTM F1292 and F1951

Correct answer: a. ASTM F1292 and F1487

Question 9: Regarding playground safety signage, which of the

following is correct

• Signage may not prevent accidents but may reduce liability