Chapter Test 5 IFSTA 7th Edition

Chapter Test 5 (IFSTA 7th Edition) Answered 2023 Which piece of PPE can provide a secondary layer of eye protection in addition to an SCBA facepiece? (183) [4.1.1, 4.3.2, 4.3.3]

• Fusee
• Neck shroud
• Protective hood
• Helmet faceshield - Correct Answer D. Helmet faceshield

What is a function of station and work uniforms? (184) [4.1.1, 4.3.2]

• Provide respiratory protection
• Protect wearer from hazardous materials
• Provide protection against advanced fire behavior
• Identify wearer as a member of the fire department - Correct Answer D. Identify

wearer as a member of the fire department

While on duty, firefighters should avoid wearing: (184) [4.1.1, 4.3.2]

• high-top shoes.
• short-sleeved shirts.
• clothing made from 100 percent cotton.
• clothing made of non-fire—resistant synthetic materials. - Correct Answer D. clothing

made of non-fire-resistant synthetic materials.In order to avoid contaminating living quarters, ______ should NOT be worn during emergency operations. (185) [4.1.1, 4.3.2]

• station footwear
• steel-toed boots
• cotton underwear
• synthetic materials - Correct Answer A. station footwear

All PPE designed for structural fire fighting must meet the requirements of: (186) [4.1.1,

4.3.2, 4.3.3]

A. NFPA 1002.

B. NFPA 1006.

C. NFPA 1971.

• NFPA 1981. - Correct Answer C. NFPA 1971.

Which piece of information must be included on the permanent compliance label inside each piece of PPE? (186) [4.1.1, 4.3.2, 4.3.3]

• Firefighter's name
• Department name
• Cleaning precautions
• Wearing instructions - Correct Answer C. Cleaning precautions 1 / 2

What is structural PPE designed to do? (187) [4.1.1, 4.3.2, 4.3.3]

• Eliminate exposure to hazardous materials
• Protect from temperatures of up to 1,000°F (540°C)
• Prevent burns from extreme fire behaviors such as fiashover
• Cover all portions of skin while reaching, bending, or moving - Correct Answer D.

Cover all portions of skin while reaching, bending, or moving In order to avoid contact burns and heat stress after leaving a heated environment,

firefighters should: (187) [4.1.1, 4.3.2]

• thoroughly inspect PPE to check for damage.
• place contaminated PPE in the cab of the apparatus.
• follow rehabilitation protocols and allow clothing to cool.
• make sure that the protective trousers and coat do not overlap. - Correct Answer C.

follow rehabilitation protocols and allow clothing to cool.Which statement regarding the use of fire fighting helmets is accurate? (188) [4.1.1,

4.3.2, 4.3.3]

• Ear flaps must be folded down, even if wearing a protective hood.
• Chin strap color and markings indicate a firefighter's rank and unit.
• Ear flaps are optional if wearing a protective hood.
• Chin straps may be worn open or closed. - Correct Answer A. Ear flaps must be

folded down, even if wearing a protective hood.During structural fire fighting operations, primary eye protection is provided by: (189)

[4.1.1, 4.3.2, 4.3.3]

• safety glasses.
• the SCBA facepiece.
• the protective hood
• helmet-mounted faceshield. - Correct Answer B. the SCBA facepiece.

Which piece of PPE is donned under the helmet and is designed to protect the neck, ears, and face from exposure to heat, embers, and debris? (190) [4.1.1, 4.3.2, 4.3.3]

• SCBA facepiece
• Thermal barrier
• Protective hood
• Moisture barrier - Correct Answer C. Protective hood

Which statement about structural fire fighting protective coats is accurate? (190) [4.1.1,

4.3.2, 4.3.3]

• The outer shell, moisture barrier, and thermal barrier must always be worn together.
• At least two of the three coat components must be worn together in order to provide

complete protection.

• The thermal barrier is required during structural operations, but should be removed

during rescue or extrication operations.

• / 2