Class B non-CDL Exam Questions with 100% Verified Correct Answers 2024/2025 What is a class C vehicle - Correct Answer any motor vehicle with a GVWR of more that 16,000lbs but less than 26,001lbs or any such vehicle towing another not in excess of 10,000lbs
When are safety inspections required - Correct Answer every 6 months (twice a year)
Registration ID cards for second division vehicles, except pole trailers or semi trailers must be - Correct Answer in the vehicle, carried by the driver or carried by the person in control of the vehicle at all times
What is the maximum heights for all vehicles on all highways - Correct Answer 13 feet 6 inches
At what weight must vehicles stop at any official weighing station - Correct Answer 16,000lbs
Maximum speed limit in Illinois on interstate highways where posted is - Correct Answer 65mph
On divided highways where must reflectors be placed near a disabled vehicle. (lights) - Correct Answer one must be placed 10 feet from the vehicles on the traffic side in the direction of the nearest approaching traffic. A second must be places 100ft from the disabled vehicle in the center of the lane or on the shoulder in the direction of approaching traffic. A third must be placed 200ft from the vehicle in the center lane or on the shoulder in the direction of approaching traffic.
Amphetamines and other drugs - Correct Answer are dangerous because they are taken to keep you awake and make you think you are wide awake when you are really not.
In a front wheel skid - Correct Answer the front end tends to go in a straight line regardless of how much you turn the steering wheel
In case of a vehicle fire - Correct Answer turn off the vehicle as soon as possible, do not attempt to open the hood if you don't have to, shoot extinguisher through louvers or radiator or from the underside of the vehicle.
A second division vehicle with a weight of 10,001lbs or more is required to carry - Correct Answer a medical examiners certificate with them at all times when operating a vehicle, a file containing a written test verification and a road test verification.
- / 2
Special equipment vehicle lights: - Correct Answer two lights on the front of the vehicle, one light must be on each upper front corner and visible for 500ft
Slow moving emblem must be placed - Correct Answer at the rear of the vehicle 4ft-12ft above the road surface, emblem must meet IDOT specs
Rear lights for slow moving vehicles - Correct Answer when required a flashing amber signal must be mounted as high as possible to the base of the vehicle and be visible for at least 500ft in normal sunlight, the slashing amber signal light also may be lighted during daylight hours.
Class A vehicle - Correct Answer Any combination of motor vehicles with a GVWR of 26,001 pounds or more, providing the GVWR of the vehicle being towed is in excess of 10,000 pounds. Also allows for operation of Class B, C and D vehicles
Class B vehicle - Correct Answer Any single motor vehicle with a GVWR of 26,001 pounds or more, or any such vehicle towing another not in excess of 10,000 pounds. Also allows for operation of class C and D vehicles.
Class C vehicle - Correct Answer Any single motor vehicle with a GVWR of more than 16,000 pounds, but less than 26,001 pounds, or any such vehicle towing another not in excess of 10,000 pounds. Also allows for operation of class D vehicles.
Class D vehicle - Correct Answer Any motor vehicle with a GVWR of 16,000 pounds or less (except those requiring a class A license due to a GVWR of over 26,001 pounds)
Class L vehicle - Correct Answer Any motor-driven cycle less than 150cc displacement
Class M vehicle - Correct Answer Any motorcycle or motor-driven cycle
When required by the Motor Fuel Tax Law - Correct Answer a valid card or an authorized reproduction of it must be carried in the cab of the vehicle or carried by the driver.
Intrastate carriers may not operate any motor vehicle on Illinois highways unless there is a sign painted or affixed - Correct Answer on both sides on the vehicle. Trade name, permit number and registration number must be visible. Letters must be at least 2inches high with a width of 1/2 inch.Registration number must show on both sides of the unit.
- / 2