CM 2215 OSHA 510 Study Guide Questions with Complete Solutions OSHA's mission is to - Correct Answers Protect safety and health of America's workers The right of the worker to seek safety and health on the job site without fear of punishment can be found in Section___ of the OSH Act - Correct Answers 11(c) Results of workplace injuries and illnesses may include - Correct Answers lower morale and increased training costs Horizontal standards apply when a condition is not covered by a ___ ___ standard - Correct Answers specific industry The purpose of OSHA directives, including Enforcement and Compliance Directives (CPL), is to ensure ___ OSHA regulations - Correct Answers consistent OSHA requires that employers certify that abatement is complete for each ___ - Correct Answers cited violation Creating employer failed to inform employees, other than ___, of damaged guardrail would result in a "creating" employer receiving a citation under OSHA's multi-employer citation policy for damaging a guardrail exposing all employees to a fall hazard. - Correct Answers its workers In addition to the presentation of credentials, the inspection process includes the ___ conference, the ___ inspection, and the ___ conference. - Correct Answers opening, walk through/around, closing As a result of a work-related illness or injury, days the employee was only able to work a ___ shift would be classified as restricted work activity (not including the day the illness or injury began). - Correct Answers partial In OSHA Record keeping, an incidence rate is the number of recordable injuries or illness per ___ full- time workers. - Correct Answers 100 1 / 2
Managers should be an example by knowing and ___ the rules employees are expected to follow to demonstrate management leadership and commitment to safety and health - Correct Answers following The two main components of an employer's accident and prevention responsibilities required by 1926.20(b) a safety and health program and jobsite inspections by a ___ person. - Correct Answers competent The maximum travel distance from any point of the protected area to the nearest fire extinguisher shall not exceed ___ feet - Correct Answers 100 Accident prevention signs such as; danger, caution, and exit signs shall be ___ when work is being performed. - Correct Answers visible When stopping a fall, a personal fall arrest system, shall bring an employee to a complete stop and limit the maximum deceleration distance to ___ feet. - Correct Answers 3.5 All hand and power tools, whether paid for by the employer or employee, shall be ___ in a safe condition. - Correct Answers maintained A person who has a recognized degree, certificate, or professional standing or who has demonstrated his/her ability to solve problems relating to specific work is a ___ person. - Correct Answers qualified Whenever practicable, all arc welding and cutting operations shall be ___ to protect employees and other persons working in the vicinity - Correct Answers sheilded Failure to inspect for oil or grease on regulator fittings, valves, or the cap threads on a cylinder of oxygen can result in ___ or explosion. - Correct Answers fire Personal fall arrest systems, when stopping a fall, shall be rigged such that an employee cannot free fall more than ___ feet or contact any lower level. - Correct Answers 6 When mechanical equipment is being used perpendicular to the roof edge, the warning lines cannot be closer than ___ feet. - Correct Answers 10
- / 2