- | Page
CPSI EXAM ALREADY SO LVED
AND GRADED TO PASS!!
Question : To be compliant with ASTM 1487, a designer
or manufacturer of playground equipment should
CORRECT ANSWER : provide buyers with a parts list
for the playground
Question : The fish or wedge probe is used to determine
whether or not a hazard exists on
CORRECT ANSWER : a partially bounded opening
Question : Which of the following is correct regarding the
impact-attenuation of surfacing material
CORRECT ANSWER : Critical height must equal or
exceed fall height
Question : When evaluating the structural integrity of a
support structure for a swing that appears to be failing, a CPSI should
- | Page
CORRECT ANSWER: hire a licensed professional
engineer to certify the integrity of the equipment
Question : Manufacturers of playground equipment must:
CORRECT ANSWER : provide the manufacturer's
identification of the equipment
Question : The majority of injuries associated with
playground equipment result from
CORRECT ANSWER : falls to the surface on which the
equipment was located
Question : An opening may present a common crush or
shear hazard only if it
CORRECT ANSWER : grabs the 5/8" (16mm) dowel
Question : The criteria for unitary surface materials
includes meeting requirements of
CORRECT ANSWER : ASTM F1292 and F1487
- | Page
Question : Regarding playground safety signage, which of
the following is correct
CORRECT ANSWER : Signage may not prevent
accidents but may reduce liability
Question : Which of the following factors is MOST
important when determining the frequency of inspections of surfacing
CORRECT ANSWER : Type of surfacing and amount of
use
Question : When planning a playground for public use,
the play equipment that is chosen must
CORRECT ANSWER : be appropriate for the age of
intended users
Question : A spring rocker with seat height of 26" is
about to be installed adjacent to the side of a fully enclosed bucket swing set. The minimum distance required between the swing set and the rocker is
CORRECT ANSWER : 108" or 9'
- | Page
Question : The Site History File for a playground should
contains
CORRECT ANSWER : a comprehensive inventory of all
equipment, a parts list, maintenance, and inspection recommendations
Question : What is the minimum use zone between a
stand-alone climber and a standing-rocking/springing playground piece
CORRECT ANSWER : 156" or 13'
Question : The _____ of each play structure shall provide
clear and concise inspection instructions
CORRECT ANSWER : Manufacturer
Question : Heights of guardrails and protective barriers
are determined by which of the following characteristics of children