CRAS Cycle 1-4 MP100 Final Exam Questions with Complete Solutions 2023/2024 What are common parameters of digital reverb? - Correct Answer Room Size, Pre- Delay, Reverb Time (Decay) Harmonics - Correct Answer whole number multiples of the fundamental frequency Fletcher-Munson - Correct Answer Discovered the Equal Loudness Curves RMS (Root Mean Square) - Correct Answer The average of the peak amplitude values What to buttons on the Tascam will configure it for mixdown mode? - Correct Answer L/R and Flip What buttons on the Neotek will configure it for mixdown mode? - Correct Answer Post, Fader, Fader, Fader, Line, Rev What is normalled to the input of the MTR? - Correct Answer Multitrack Bus What mode should you be in for overdubbing and mixdown on the tape machine? - Correct Answer All Sel Rep What mode on the MTR-90 is used for rehearsing, allowing some tracks to be in input and others to lay back? - Correct Answer Individual What does the Direct Out feed on the API? - Correct Answer Patch Row S What tracks does the Direct Out feed on the Neotek? - Correct Answer 27-32 Search Zero - Correct Answer Fast forwards or rewinds the tape to 0 on the MTR-90 What button will take the tape to the time in the locate time window on the MTR-90? - Correct Answer Search All Safe - Correct Answer Disables recording on all tracks on the MTR-90 C/R PGM - Correct Answer What button in the master section on the API allows for internal monitoring?On the API, what is the name of the main console output fader? - Correct Answer Grand Master What button in the master section on the API allows for external monitoring? - Correct Answer C/R Play 1 / 2
Where does a microphone pick up the most amount of sound? - Correct Answer On axis If two instruments are almost the same pitch or sound, what is this called? - Correct Answer Timbre Where does the half normal break? - Correct Answer At the input What is the speed of sound? - Correct Answer 1,130 feet per second at 70 degrees Fahrenheit and it will increase or decrease by 1.1 feet per degree When using parallel compression should your AUX send be pre or post? - Correct Answer Pre so the signal is going into fader for the parallel compression What are the 5 types of reverb? - Correct Answer Acoustic reverberation, echo chamber, plate reverb, spring reverb, digital reverb devices Acoustic Reverberation - Correct Answer Natural reverb within an environment Echo Chamber - Correct Answer A room built within a studio specifically for reverb Plate Reverb - Correct Answer Plate of sheet metal in a wooden box Spring Reverb - Correct Answer Plate with springs Digital reverb device - Correct Answer Algorithms in a plugin simulating reverb Feedback and Delay Time - Correct Answer What are common parameters of delay?Runaway delay - Correct Answer Delay with the feedback at 100% Slapback delay - Correct Answer Delay with the feedback at 0% What is the default input into the small fader for the API? - Correct Answer Mic Attack - Correct Answer Determines how quickly a gate will open once the input exceeds the threshold Release - Correct Answer Determines how quickly a gate will close once the input falls below the threshold Hold - Correct Answer Determines how long a gate will stay open What alcohol is used for cleaning the MTR-90? - Correct Answer 99.99% Isopropil Alcohol
- / 2