CSST EXAM AND STUDY GUIDE EXAM NEWEST 2025

EXAM ELABORATIONS Aug 28, 2025
Loading...

Loading document viewer...

Page 0 of 0

Document Text

  • | P a g e

pg. 1

CSST EXAM AND STUDY GUIDE EXAM NEWEST 2025

ACTUAL EXAM TEST BANK| COMPLETE 400 REAL

EXAM QUESTIONS AND CORRECT DETAILED

ANSWERS (VERIFIED ANSWERS) ALREADY GRADED

A+| CSST EXAM BUILDING INSPECTION WITH

FOCUS ON ASBESTOS 2025 (NEW!!)

What is the minimum time frame in which to collect clearance air samples after applying lockdown encapsulant?

  • One hour
  • It is dry
  • Eight hours
  • 24 hours - Correct Answer - D. 24 hours

Which of these is a Cal OSHA Class II removal?

  • Ceiling tile removal
  • Gasket removal
  • Drywall removal
  • B & C - Correct Answer - D. B & C

An enclosure (as an asbestos control option) is best described as:

  • Carpeting over floor tile
  • Drywall caulked to be airtight, fastened beneath acoustic spray
  • Two layers of 10 mil poly around TSI 1 / 4
  • | P a g e

pg. 2

  • A uniform application of 10mil bridging encapsulant - Correct
  • Answer - B. Drywall caulked to be airtight, fastened beneath acoustic spray

ACBM in a building to be demolished consists of floor tile, drywall, and acoustic ceiling spray. Which material is typically removed first?

  • Floor tile
  • Drywall
  • Acoustic ceiling
  • It does not matter - Correct Answer - C. Acoustic ceiling

Transite is:

  • A friable material / class one
  • A person with no home
  • Class two, non friable ACM
  • An asbestos mineral type - Correct Answer - C. Class two, non friable
  • ACM

Air changes per hour in a class 1 asbestos job site:

  • Indicate how much an exposed worker breathes
  • Are measured by a rotometer
  • Are at a minimum of every 15 minutes
  • Are measured by a negative air unit - Correct Answer - C. Are at a
  • minimum of every 15 minutes

  • / 4
  • | P a g e

pg. 3

A rotometer measures:

  • Air changes per hour
  • Air flow
  • Employee rotation patterns
  • Mil thickness of poly, encapsulant, etc. - Correct Answer - B. Air
  • flow

A manometer measures:

  • Negative air flow patterns
  • Employee rotation patterns
  • Pressure differential in containment
  • Air pressure in respirators - Correct Answer - C. Pressure differential
  • in containment

For Class I work, a manometer:

  • Is used based on supervisor's personal judgment
  • Is mandatory, according to Cal OSHA Title 8, Section 1529
  • Is utilized periodically to verify pressure differential
  • Is usually placed in the clean room - Correct Answer - B. Is
  • mandatory, according to Cal OSHA Title 8, Section 1529

Which regulation created the course known as Asbestos Contractor/Supervisor?

  • 40 CFR Part 61, Subpart M 3 / 4
  • | P a g e

pg. 4

B. T8, CCR 1529

  • 40 CFR, Part 763, Subpart E
  • 29 CFR 1926.1101 - Correct Answer - C. 40 CFR, Part 763, Subpart
  • E

Cigarette smokers who work with asbestos have how many times greater a chance of contracting lung cancer than a non-smoker who does not work with asbestos?

  • 10 times to 20 times
  • 20 times to 50 times
  • 50 times to 90 times
  • 90 times to 120 times - Correct Answer - C. 50 times to 90 times

What is the protection factor (PF) of a half-face negative-pressure respirator?

  • 10
  • 50

C. 100

  • 1000 - Correct Answer - A. 10

What is another type of liability insurance besides occurrence-based liability insurance?

  • Cash plus
  • Claims made
  • Decreasing term
  • / 4

Download Document

Buy This Document

$30.00 One-time purchase
Buy Now
  • Full access to this document
  • Download anytime
  • No expiration

Document Information

Category: EXAM ELABORATIONS
Added: Aug 28, 2025
Description:

pg. 1 CSST EXAM AND STUDY GUIDE EXAM NEWEST 2025 ACTUAL EXAM TEST BANK| COMPLETE 400 REAL EXAM QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) ALREADY GRADED A+| CSST EXAM BUILDING INSPEC...

Get this document $30.00