CWB Welding Inspector Level III Study Guide Latest Update 2024-2025 Actual Exam Questions and 100% Verified Correct Answers Guaranteed A+
A Wide solidification range and rapid growth rate during solidification will encourage: (a) planar growth.(b) equilibrium conditions.(c) no constitutional supercooling.(d) dendritic growth.
(e) eutectic formation. - CORRECT ANSWER: (d)
Can strain aging in low carbon steels take place at room temperature? - CORRECT
ANSWER: Yes
Centerline hot cracking im more likely with:
(a) shallow, round welds.(b) short weld pools.(c) wide groove angles.(d) deep, narrow welds.
(e) vertical welds. - CORRECT ANSWER: (d)
Compared with pure tungsten, a thoriated tungsten electrode is expected to:
(a) get hotter more quickly.(b) absorb more electrons.(c) have a shorten life.(d) operate at a lower temperature for the same current.
(e) emit more ions. - CORRECT ANSWER: (d) 1 / 2
Electricity can be conducted by:
(a) atoms and electrons.(b) electrons and ions.
(c) only ions. - CORRECT ANSWER: (b)
From Figure 11.10(Module 20-2014, page 54), estimate the cooling rate for a submerged arc bead on a 19 mm plate (no preheat) with an energy input of 1.77 kJ/in. -
CORRECT ANSWER: 16°C/s at 540°C
Hot Cracking during welding is more likely in:
(a) pure metals.(b) alloys with a wide solidification range.
(c) alloys with a very high alloy content. - CORRECT ANSWER: (b)
How can porosity due to nitrogen be controlled in welding nickel? - CORRECT
ANSWER: By using filler metal containing titanium.
How does yield strength vary with grain size? - CORRECT ANSWER: Inversely as the square root of the grain size.
How many phases are there in a eutectic- one or two? - CORRECT ANSWER: Two
If centerline solidification cracking is occuring in welding a structural steel what is a likely cause?(a) electrical extension too long (b) arc voltage too high (c) welding current and speed too high
(d) weld too large - CORRECT ANSWER: (c)
- / 2