- | P a g e
ELECTRONICS SECURITY TECHNICIAN LEVEL
1 EXAM NEWEST 2025 ACTUAL EXAM
COMPLETE 100 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
|ALREADY GRADED A+
When installing a magnetic contact on a movable window, the _______ must be placed on the movable portion of the window. - ANSWER-magnet
_____ should be installed in front of and within range of the windows they are designed to protect. - ANSWER- Glass break sensors
True or False? Smoke alarms are more commonly used by home builders due to their increased sensitivity. - ANSWER-False
A smoke _____ is connected to a circuit which is connected to an alarm panel. - ANSWER-detector 1 / 3
- | P a g e
True or False? If a siren is "integral" to the burglar alarm panel, it is not built-in to the panel. - ANSWER-False
The "temporal 3 or T3" audible notification pattern is used to indicate what type of notification? - ANSWER- Fire Emergency
According to NFPA 72, when using a decibel meter to test proper audible notification levels in a sleeping room, the door to the sleeping room must be? - ANSWER-Closed
According to standard UL 68(1), removable covers of plates of conduit boxes or junction boxes shall be electrically tampered or permanently secured with _____- way screws or similar type fastening device. - ANSWER- 1-way screws
A general emergency, mass notification system is used to warn the public of what? - ANSWER-Severe weather
- / 3
- | P a g e
A _____ is used to reduce standard commercial supply voltage to a lower voltage for use by an alarm system. - ANSWER-transformer
True or False? The primary voltage of a step-down transformer will have a higher voltage than the secondary voltage. - ANSWER-True
A 12-volt security system requires secondary power for any potential commercial power interruption. It has been determined that the security system will require a minimum of 10 Amp Hour of battery capacity. Two 12 Volt 7 amp hour batteries have been supplied. How should the batteries be connected? - ANSWER-Connect the 12 volt batteries in parallel
A sealed lead acid battery is used for the _____ power supply for most wired alarm systems. - ANSWER- Secondary
- / 3