CFESA ELECTRICAL PRACTICE TEST Latest Update 2025-2026 Exam 50 Questions with 100% Verified Correct Answers Guaranteed A+
240 V rated equipment connected to a 208 bolt supply will run with: - CORRECT
ANSWER:
A 208 V fryer connected to a 240 V supply could have what results? - CORRECT
ANSWER:
A capacitor start motor should be used in what applications? - CORRECT ANSWER:
A ground fault breaker is considered more reliable than a ground fault receptacle. T or
F? - CORRECT ANSWER:
A hot line in an AC power supply contains 120 V. T or F? - CORRECT ANSWER:
A step down transformer is rated at 60 VA. The primary side is connected to on 120
VAC and the secondary output is 30 VAC. - CORRECT ANSWER:
A thermostat has a differential of 5°F. This meCORRECT ANSWER: - CORRECT
ANSWER:
A wild leg must always be connected where on the terminal block on a three phase
equipment? - CORRECT ANSWER:
AC power has a negative and a positive line. T or F? - CORRECT ANSWER:
- / 2
Add 240 V range connected to a 208 V power supply will: - CORRECT ANSWER:
An electric immersion element that is split open indicates: - CORRECT ANSWER:
Any thermostat that fails in a closed contact position: - CORRECT ANSWER:
Before working on electrical equipment with the power on: - CORRECT ANSWER:
Contacts on a contactor that are melted together indicate: - CORRECT ANSWER:
Higher voltage supplies are used to: - CORRECT ANSWER:
How can you tell if a thermostat is pilot duty? - CORRECT ANSWER:
I warmer has an infinite switch but the terminal literally burned out of it. - CORRECT
ANSWER:
If a blower keeps coming off the motor shaft after it runs for a while: - CORRECT
ANSWER:
If a neon signal light is shorted: - CORRECT ANSWER:
In order to be used for motor circuits a switch must be rated: - CORRECT ANSWER:
In the figure on 39. If the element shorts to ground when the switch is closed: -
CORRECT ANSWER:
- / 2