FDOT Asphalt Paving Level 2 Exam (Latest Update 2025 / 2026) Prep Questions & Answers | Grade A | 100% Correct
Question:
In project documents order, which Document(s) has higher authority than the Supplemental Specifications?
- Standard Specifications
- Plans
- Technical Special Provisions
- All of the above
- Both B and C
Answer:
(E. Both B and C) Plans and Technical Special Provisions
- / 3
Question:
What is the desired tack coat application rate for a milled surface?
- 0.02-0.08 gal/yd²
- 0.45 gal/yd²
- 0.06 gal/yd²
- 0.08 gal/yd²
- All the above
Answer:
(C.) 0.06 gal/yd²
Question:
Density Testing for acceptance will not be performed on:
- Shoulder less than 5 feet or less
- Miscellaneous Asphalt Pavement
- Cross-overs and intersections less than 1000 feet
- Acceleration and deceleration lanes less than 1000 feet
- All the above
Answer:
(E. All the Above) - Shoulder less than 5 feet or less, Miscellaneous Asphalt Pavement, Cross-overs and intersections less than 1000 feet, and Acceleration and deceleration lanes less than 1000 feet 2 / 3
Question:
A _______ is utilized when attempting to match elevations of two mats placed side by side
Answer:
(D.) Joint Matcher
Question:
Experts maintain that 95% of paver related problems can be eliminated by:
- Keeping the hopper empty between loads
- Keeping the paver running slow
- Adjusting the tow points constantly
- Maintaining a uniform head of material in front of the auger
- All the above
Answer:
(D.) Maintaining a uniform head of material in front of the auger
Question:
When milling for slope on the mainline roadway, if the average of 10 slope checks for the VT differs from the target by 0.1% what is required?
Answer:
(A.) Tell Contractor to shut down milling operation. Make corrections
- / 3