Florida GC Exam - Project Management Section

Florida GC Exam - Project Management Section Save Stretch your brain before your first study session Learn1 / 6Study with Learn Post-tensioned Concrete Slabs Choose matching term 1

• According to ASTM C94, when truck mixers are used the load must be completely

discharged within______ after batching.(Design and Control of Concrete Mixtures --> Mixing Concrete) 2

• In _______ , the tendons are raised higher above the forms in the vicinity of the

supporting column than at the midspan of the slab.(Principles and Practices of Commercial Construction --> Tendon, Post Tensioning) 3

• Where the ______ of soil is in doubt, the building official shall be permitted to require

a geotechnical investigation.Florida Building Code --> Soils and Foundations, Geotechnical Investigation) 1 / 3

Terms in this set (130) Well-blasted rock has a

swell percentage of:

(Principles and Practices of Commercial Construction --> Earthwork) 20% Lifelines in areas subjected to cutting or abrasion shall be a minimum of ______ inch wire core manila rope

(OSHA)

7/8 All excavations made in Type B soil 20 feet or less in depth which have vertically sided lower portions shall be shielded or supported to a height _____ inches above the top of the vertical side

(OSHA)

At least 18 inches 4 The calculated fire-resistance rating for a 3.8 inch thick sand and light weight aggregate precast concrete wall shall be _______ hour(s).(Florida Building Code --> Calculated Fire Resistance) Don't know? 2 / 3

The calculated fire- resistance rating for a 3.8 inch thick sand and light weight aggregate precast concrete wall shall be _______ hour(s).(Florida Building Code --> Calculated Fire Resistance)

• hours

Welded splices are almost always necessary in_______.(Reinforcing Bars --> Welding) Precast Concrete Construction

• The OSHA area office

has a maximum of ____ days to assess the penalty for failure to abate a violation.(Florida Contractors Manual --> Categories of Violations) 30 Days

• High-density R-30 batts

used in cathedral ceilings are_____ inches thick.(Energy Efficient Building Construction --> Cathedral Ceilings)

8 - 1/4

• According to ASTM

C94, when truck mixers are used the load must be completely discharged within______ after batching.(Design and Control of Concrete Mixtures --> Mixing Concrete) 90 Minutes

• / 3