- | P a g e
FRESENIUS VIRTUAL LEARNING PCT NEW HIRE
EXAM NEWEST 2025 ACTUAL EXAM COMPLETE 200
QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+
If the dialysate was prepared by the machine incorrectly with too much RO and was a hypotonic solution, you would get a ______ conductivity alarm - ANSWER-low
What is the safe range the TCD (Theoretical Conductivity) gives you? - ANSWER-+/- 0.5
As long as the conductivity is within a +/- 0.5 range of TCD, the conductivity alarm will not sound because the dialysate is a _______ solution. - ANSWER-isotonic
If the dialysate is hypertonic, what happens to the RBCs? - ANSWER-crenation
***Because fluid is pulled out of the cell into the dialysate because the dialysate has a higher concentration of solutes.When the too much fluid is pulled out of the red blood cells, it causes them to shrink (crenation). 1 / 4
- | P a g e
If the dialysate is hypotonic, what happens to the RBCs? - ANSWER-hemolysis
***Because fluid is pulled into the red blood cell, which has more solutes than the dialysate, and they rupture because they swell too much (hemolysis).
What is the acceptable value range for testing dialysate conductivity with a pHoenix meter? - ANSWER-+/- 0.3
How well dialysis is working to remove waste products from the blood is known as ________. - ANSWER-adequacy
The amount of blood that is completely cleared of a solute in one minute of treatment given a blood flow rate and dialysate flow rate is known as ________. - ANSWER-Clearance
What are the 6 elements that affect Clearance? - ANSWER-1.type of dialyzer (160/180/200/250)
- treatment time
- needle size 2 / 4
- | P a g e
- blood/dialysate flow rate
- anticoagulation (heparinization)
- temperature
KECN means what? - ANSWER-clearance effective by conductivity sodium (Na+)
With KECN, we use sodium (Na+) to measure clearance because it is identical in weight to _______. - ANSWER-urea
Ultrafiltration is filtration under _______. - ANSWER-pressure
Transmembrane pressure (TMP) is the blood side pressure plus the dialysate side pressure.
True or False - ANSWER-True
How long must you wait after giving the patient heparin before you can start treatment? - ANSWER-3-5 minutes
- / 4
- | P a g e
The needle size directly correlates with the _____ rate. - ANSWER-BFR (blood flow rate)
With a 16 gauge needle, the BFR should not exceed ____. - ANSWER-350 (300-350 BFR recommended for 16 gauge needle)
Warmer dialysate will cause the patient's blood pressure to ______. - ANSWER-drop
***Because it causes the blood vessels to relax (widen), which decreases blood pressure.
Cooler dialysate will cause the patient's blood pressure to ______. - ANSWER-increase
***Because it causes the blood vessels to constrict (narrow), which increases blood pressure.
In the dialyzer, is the pressure higher on the blood side or the dialysate side? - ANSWER-blood side
- / 4