FSVO state test The purpose of using a spotter is to - ANSWER the driver by observing cross traffic the as the area in the blind spot
horizontal and vertical openings, the operator must know: To effectively
judge the ability of a vehicle to pass through areas of restricted - ANSWER vehicle dimensions.Which driving skill would not require using a spotter? - ANSWER Diminishing clearance The distance a vehicle travels from the point where you begin recognizing the hazard until the apparatus comes to a complete stop is
called the: - ANSWER total stopping distance.
The confined space turnaround maneuver allows an operator to turn the apparatus degrees - ANSWER 180 1 / 2
Improper tire pressures may cause - ANSWER poor handling One method of performing an apparatus/pretrip inspection is the - ANSWER walk-around method.Before shutdown the apparatus engine temperature should be allowed to stabilize by idling it for minutes. - ANSWER 3 to 5 Checking for voltage, electrolyte level, and corrosion are all steps in
inspecting: - ANSWER the battery.
While traveling in the center lane of a multiple-lane highway on an
emergency call, the vehicle in front of you stops. You should: -
ANSWER brake to reduce speed and pass on the left side of the vehicle.The vacuum test requires a reading at the end of 5 minutes with no more than inches of vacuum being lost. - ANSWER 10
When responding to emergencies, the use of warning devices: -
ANSWER does not allow the driver to disregard other drivers.
- / 2