pg. 1 Georgia Class E License Practice Test/ Questions with Correct Verified Answers – Updated 2024-2025.
- What is the minimum amount of tread depth that your tires should have?
- There should be at least four-thirty seconds (4/32) inch of tread depth in every major groove on the
- There should be at least one-inch tread depth in every major groove on all wheels.
- There should be at least four-thirty seconds inch tread depth in every major groove on all wheels. -
front wheels and at least two-thirty seconds (2/32) inch tread on all other wheels.
ANSWER - A. There should be at least four-thirty seconds (4/32) inch of tread depth in every major groove on the front wheels and at least two-thirty seconds (2/32) inch tread on all other wheels.
- How do you test hydraulic brakes for a leak?
- With the vehicle under way at a low speed, apply firm pressure, stopping the vehicle as quickly as
- With the vehicle stopped, push down the brake pedal and do not release for at least five seconds.
- With the vehicle stopped, pump the brake pedal three times. Apply firm pressure, and then hold for
possible.
five seconds. - ANSWER - C. With the vehicle stopped, pump the brake pedal three times. Apply firm pressure, and then hold for five seconds.
- How do you test hydraulic brakes for their stopping action?
- Go about 5 mph. Push the brake pedal firmly.
- With the vehicle stopped, pump the brake pedal three times. Apply firm pressure, and then hold for
- With the vehicle stopped, push the brake pedal firmly, and then hold for five seconds. - ANSWER - A.
five seconds.
Go about 5 mph. Push the brake pedal firmly.
- How does tire pressure affect hydroplaning?
- Hydroplaning is not affected by tire pressure.
- Hydroplaning is more likely to occur when tire pressure is low. 1 / 2
pg. 2
- Hydroplaning is more likely to occur when tires are over inflated. - ANSWER - B. Hydroplaning is more
likely to occur when tire pressure is low.
- What is the best way to use the brake pedal on a steep downhill grade?
- Use a heavy pressure repeatedly.
- Avoid using the brakes.
- Shift to a lower gear before starting downgrade and use a light, steady pressure on the brake pedal. -
ANSWER - C. Shift to a lower gear before starting downgrade and use a light, steady pressure on the brake pedal.
- What is a good rule as to the speed you should go when driving at night?
- You should keep your speed slow enough to stop within the range of your headlights.
- You do not have to be able to stop within the distance that you can see.
- You should never drive so fast as to require your high beams. - ANSWER - A. You should keep your
speed slow enough to stop within the range of your headlights.
- How many times more distance does it take to stop whenever you double your speed?
- Twice as much distance.
- Three times as much distance.
- Four times as much distance. - ANSWER - C. Four times as much distance.
- In checking tires what are some problems that you should look for?
- Too much or too little specification information on the sidewalls.
- Bad wear, cuts or other damage, tread separation, cut or cracked valve stems. Dual tires that come in
- Regrooved, recapped, or retreaded tires on the drive wheels. - ANSWER - B. Bad wear, cuts or other
contact, mismatched sizes, radial and bias-ply tires used together.
damage, tread separation, cut or cracked valve stems. Dual tires that come in contact, mismatched sizes, radial and bias-ply tires used together.
- What are some steering system defects to look for?
- Missing nuts, bolts, cotter keys or other parts; bent, loose or broken parts.
- / 2