Journeyman's Lineman Final Study Guide Latest Update 2024-2025 Actual Exam with 110 Questions and 100% Verified Correct Answers Guaranteed A+ Approved by the Professor
A "qualified person" is defined as one who is:
- Knowledgeable of the task at hand and not necessarily at the job site
- In constant visual and/or verbal contact with the person performing the designated
- Knowledgeable of the task at hand and is capable of performing the appropriate
task
emergency rescue. - CORRECT ANSWER: C
a "work area" is defined as the area:
- in which all work activities and equipment are confined
- between the outermost traffic control devices
c. containing the workers and equipment - CORRECT ANSWER: a
a class a fire extinguisher can be used on fires involving
- flammable liquid
- electrical equipment
c. ordinary combustibles - CORRECT ANSWER: c
a class a pressurized water fire extinguisher extinguishes a fire by
- removing heat
- displacing the oxygen
c. separating the oxygen from the fuel - CORRECT ANSWER: a
a class b fire extinguisher can be used on fires involving 1 / 3
- flammable liquid
- electrical equipment
c. ordinary combustibles - CORRECT ANSWER: a
a class c fire extinguisher can be used on fires involving
- flammable liquid
- electrical equipment
c. ordinary combustibles - CORRECT ANSWER: b
a fire extinguisher bearing the symbol above can be used on fires involving
- energized electrical equipment only
- ordinary combustibles an flammable liquid
- ordinary combustibles, flammable liquid, and energized electrical equipment -
CORRECT ANSWER: b
A fuse link:
- Attaches directly to a hot line clamp
- Is the replaceable fuse used in cutouts
- Is a replaceable fuse installed in the primary bushing of a transformer - CORRECT
ANSWER: B
A fused cutout is used to:
- Provide high voltage fuse protection
- Provide lightning protection
C. Provide protection for animal contact - CORRECT ANSWER: A
A general resource for workers of the line industry is a work known as:
- The Lineman's and Cableman's Handbook
- OSHA Regulation 1910.269. 2 / 3
C. The Distribution Standard - CORRECT ANSWER: A
A hot line clamp is designed to
- Connect fuse links with the energy source
- Make a connection with the aid of live line tools
- Connects high voltage risers to the high voltage bushings of transformers -
CORRECT ANSWER: B
A lightning arrestor is designed to
- Connect a transformer to the secondary risers
- Connect the fuse link to the secondary bushing
- Offer lightning and other high voltage surges a path to the ground - CORRECT
ANSWER: C
A load buster is a device for opening cutouts and switches that are carrying? -
CORRECT ANSWER: load current
A person should stretch until?
- A slight burning sensation is felt
- The muscles become tired
C. Slight pain is felt in the muscles - CORRECT ANSWER: A
A pulling eye is:
- Used on energized conductors
- Attached temporarily to anchor rods
C. For rigging a strap hoist to a 2 part strap - CORRECT ANSWER: B
A simplified drawing of distribution circuitry showing conductor sizes, system protection devices, switching points, etc. is known as a:
- / 3