mp review from cras connect Questions and Answers 2023 A Control Room is designed and built to be acoustically isolated and for . . . - Correct Answer Critical Listening What do we call the process where all of the individual tracks from a multitrack recording are combined through the console and adjustments are made to the level, tone, and spatial positioning of the sources? - Correct Answer mixing What is the process in which the mix engineer combines all of the tracks from the MTR within the console and adjusts levels, panning, and adds effects (both time-based and dynamic effects). - Correct Answer mixing What is the name of the recorder that is designed to record the stereo mix? - Correct Answer MDR What is the term for a device that will change one form of energy to another corresponding form of energy? - Correct Answer transducer What are three electrical level? - Correct Answer mic, line, and speaker level T/F: The three MAIN steps to the multitrack recording process are: 1) Recording 2) Overdubbing 3) Mixing. - Correct Answer true What are the three main steps to the multitrack recording process? - Correct Answer recording, overdubbing, and mixing The application of scientific and mathematical principles to achieve an end result. - Correct Answer engineering A room that is acoustically isolated from the studio and surrounding areas, and used for critical listening. - Correct Answer control room Allows the engineer to combine, control, and distribute audio signals. - Correct Answer console A recorder that has three tracks or more to record to and play back from. - Correct Answer MTR A room usually made up of one or more acoustic spaces that are designed -and tuned- for capturing the best possible sound. - Correct Answer studio The most important person in the studio. - Correct Answer artist 1 / 2
An additional musician used for a project, who is not normally part of the main recording group. - Correct Answer session musician The person in charge of the studio budget, studio booking, song arrangement, etc. - Correct Answer producer The person who sets up microphones, gets proper levels to tape, makes sure everything sounds good, and records, overdubs, and mixes the recording. - Correct Answer engineer The person who does whatever the chief engineer or producer needs them to do. - Correct Answer assistant engineer The process by which one or more sound sources are picked up by a microphone or are recorded directly (a keyboard, for example) to one or more tracks of a multitrack recording system. - Correct Answer recording The process during which one would edit, fix, add, or replace tracks. - Correct Answer overdubbing The process in which the engineer would combine tracks, balance levels, do panning, EQ, etc. - Correct Answer mixing Electrical level measured in millivolts. - Correct Answer mic level Electrical level measured as 1.23 volts. - Correct Answer line level Electrical level measured from 1-50 volts. - Correct Answer speaker level What is the first octave of 550 Hz? - Correct Answer 1100 Hz What are two examples of a transducer? - Correct Answer speaker and microphone Which waveform characteristic deals with volume changes over time? - Correct Answer envelope How is frequency measured? - Correct Answer Hz What is the second harmonic of 200Hz? - Correct Answer 400Hz The brain's perception and interpretation of the vibration of a physical stimulus which causes sound pressure waves to propagate through the air. - Correct Answer sound Repetitive variations of atmospheric pressure - Correct Answer sound pressure waves
- / 2