NACE CIP 1 CBT Exam Practice Questions
Generally speaking, on a typical coating project overall safety is the responsibility of?
Correct Answer:
A certified safety professional.
A typical daily report should include which of the following?
Correct Answer:
Description of manpower and equipment used by the contractor, explanation of work stoppages and list of environmental conditions.
Inspection records may be used to:
Correct Answer:
Help resolving legal or arbitration disputes, assist owners in the evaluation of the applicator performance, assist owners in the evaluation of the inspector’s performance and determine total cost of project.
Daily reports or weekly reports should be written in?
Correct Answer:
Pen 1 / 4
According to ASTM D 4417 Method B 2014 when taking measurements using a profile gauge, at each location you should make?
Correct Answer:
10 readings per location, recording the maximum value. Determine mean (average) for all maximum valises the reported profile.
What is an advantage of airless spray compared to conventional air spray?
Correct Answer:
Faster production rate
You arrive to inspect a bride repainting project where containment (enclosure) has already been erected but dehumidification is not being used. What Inspection challenges do you expect specific to working inside the containment?
Correct Answer:
Illumination and Control of temperature and humidity.
Improper atomization of the coating may cause which of the following?
Correct Answer:
Uneven DFT, Dry Spray and Overspray.
High viscosity due to low temperature should be corrected by?
Correct Answer:
Adding extra thinner. 2 / 4
SSPC Technology Guide No. 12 states coating inspection requires a minimum of which of the following?
Correct Answer:
50 foot candles (538 lumens)
One major advantage of conventional spray?
Correct Answer:
Applicator control.
When using a wet film thickness (WFT) comb/gauge, the measurement should be taken?
Correct Answer:
Immediately after the coating is applied.
A well written specification requires a surface profile depth defined as?
Correct Answer:
A range of measurements.
The testing for water soluble ferrous salts is?
Correct Answer:
Potassium Ferricyanide Test
- / 4
Solvent borne inorganic zinc primer is being applied with airless spray to complex bride with difficult access for application. The contractor is having difficulty with high DFT resulting in mud-cracking. What application method might be a good alternative?
Correct Answer:
Conventional Spray
When reporting the wet film thickness from a wet film thickness comb/gauge (WFT) you report?
Correct Answer:
The last tooth that has coating on it.
Adding an incorrect solvent to a coating may cause?
Correct Answer:
Non drying and non curing.
You are reviewing the documentation for a tank waiting project and notice there is a conflict between the project specification and the manufacture's product data sheet on the required DFT of the primer. The owner is not reachable for clarification. What should be done?
Correct Answer:
Follow the specification.
- / 4