NACE CIP 2 Ultimate Study Guide
Standards Engineering Society
Correct Answer:
SES
NACE
Correct Answer:
one of the world’s largest voluntary standards-development groups
50%
Correct Answer:
at what percentage of all NACE standards are related to protective coatings
Standard Practice
Correct Answer:
SP
- / 4
Test Method
Correct Answer:
TM
Materials Requirement
Correct Answer:
MR
Concrete
Correct Answer:
when dense and poured well, it is one of the most corrosion-resistant coatings available for steel
Concrete
Correct Answer:
relatively inexpensive and durable coating
Concrete
Correct Answer:
probably provides the largest surface area of all construction materials
- / 4
Concrete
Correct Answer:
inorganic, hard, good compressive strength, and improves with age
Concrete
Correct Answer:
mix Portland cement, aggregate, and water
Lime
Correct Answer:
the source of concrete's high alkalinity
Steel
Correct Answer:
is passivated when the alkalinity reaches a pH of 11.5 or higher
Hydration Cure
Correct Answer:
process begins as soon as water contacts the Portland cement and continues for an extended length of time
- / 4
Green
Correct Answer:
term given to uncured concrete
Guniting
Correct Answer:
the process of spraying or slinging shotcrete onto a surface as a coating
Guniting
Correct Answer:
rough and dense, but has few pinholes, air pockets, or subsurface cavities
Concrete Block
Correct Answer:
pinholes, rock pockets, air pockets, cavities, tie holes, and other imperfections in the surface may develop
Acid Etching
Correct Answer:
uses a dilute acid solution to remove laitance and roughen the concrete surface
- / 4