NCCCO Core Practice Exam

EXAM ELABORATIONS Aug 28, 2025
Loading...

Loading document viewer...

Page 0 of 0

Document Text

NCCCO Core Practice Exam (2024 / 2025 Update) Questions and 100% Correct Verified Answers | Grade A

Question:

From which two points should the boom be measured?

Answer:

From the boom hinge pins to the center of the boom tip sheave

Question:

What is the preferred method of installing wire rope from a reel onto a hoist drum?

Answer:

The rope runs from the top of the reel to the top of the drum

  • / 3

Question:

Over which quadrant are truck crane capacities usually greater?

Answer:

Over the rear.

Question:

According to OSHA, which accessible area of an operating crane must always be barricaded?

Answer:

The swing radius of the rear of the rotating superstructure

Question:

What is the OSHA regulation governing cranes in construction?

Answer:

1926.1400

Question:

Under which circumstance is a crack in the windshield of a crane cab okay?

Answer:

As long as it causes no visible distortion that would interfere with safe operations

  • / 3

Question:

Under which circumstance does OSHA permits hoisting of personnel by crane?

Answer:

As long as there is no less hazardous or practicable way

Question:

Unless the manufacturer states otherwise, what crane capacity chart is appropriate when a crane is set up with 3 of its 4 outriggers extended and the fourth is retracted?

Answer:

On-rubber chart

Question:

According to OSHA, while hoisting personnel, the total load must not exceed what percentage of the crane's rated capacity?"

Answer:

50%

Question:

When is side loading of crane booms permitted?

Answer:

Only with freely suspended loads

  • / 3

Download Document

Buy This Document

$30.00 One-time purchase
Buy Now
  • Full access to this document
  • Download anytime
  • No expiration

Document Information

Category: EXAM ELABORATIONS
Added: Aug 28, 2025
Description:

NCCCO Core Practice Exam ( Update) Questions and 100% Correct Verified Answers | Grade A Question: From which two points should the boom be measured? Answer: From the boom hinge pins to the center ...

Get this document $30.00