NEIEP 200 Final Exam Version 2 (Latest 2024 / 2025 Update) Questions and Verified Answers | 100% Correct | Grade A
Question:
a mechanic attaches a chainfall to a hoisting beam with a beam clamp. what happens to the capacity of the hoisting beam?
Answer:
it is reduced to 50% of original capacity
Question:
you are rigging elevator equipment with a sling angle of 60 degrees. you are using a shouldered eye bolt with a tapped 1/2" diameter hole. once the shoulder is seated, what is the minimum thread depth required?
Answer:
at least 3/4"
- / 3
Question:
you will be hoisting 1klbs with a single leg vertical hitch. what will the sling load be when the load is in the air
Answer:
1k lbs
Question:
you must attach a wire rope to a load by creating a loop with 3 u-bolt wire rope clips. how should the clips be attached?
Answer:
no nuts on a dead horse
Question:
you are using a bowline knot- what is one disadvantage of this knot
Answer:
is can easily loosen when not loaded
Question:
you are preparing to lift a load and need to tie the ends of two ropes together.which knot should you use?
Answer:
square 2 / 3
Question:
the rated load tag on a sling is 2000lbs. what does this mean?
Answer:
load limit that can be picked and held
Question:
you need to lift rails to the top floor of a building. with a well wheel at the top of the hoistway, what type of rope should you use?
Answer:
synthetic
Question:
a crane is needed to hoist controllers on to the roof. who is responsible for making the lift plan?
Answer:
lift director
Question:
during elevator install you need to rig equipment to the top of the building.what info must be included in the lift plan?
Answer:
capacity of rigging material
- / 3