NISP Fire Safety Professional(AUS Training)Solved 100% Oxygen, heat, and fuel - Answer To ignite and sustain a fire, a chemical reaction or
spark is combined with:
each chemical transported, produced or used on site. - Answer An SDS (Safety Data
Sheet) is required for:
heat - Answer The condition of warming measured by rising degree is:
All over the building - Answer Sprinklers are effective because they release an
extinguishing agent:
4-step process to use a fire extinguisher - Answer Define PASS Grease, gas, and oil - Answer Class B fires use the following as fuel
165 degrees - Answer Most sprinklers activate at...:
Cigarettes not fully out inside a trash can - Answer When on patrol, watch for
careless discards such as:
ensure control valve is closed - Answer When checking a sprinkler system, do the
following except:
36" of cleared space at all times - Answer Aisles and corridors should have:
Activate when air temp hit a certain heat level - Answer Heat detectors:
Check the tag on the frame or door - Answer You can tell the rating on a fire door by: fire should be in immediate are it began in - Answer If you decide to fight a fire:
Kitchens - Answer Heat detectors are best used in:
have water held back and pressurized - Answer Dry sprinkler systems:
Class B & C - Answer A carbon dioxide fire extinguisher may be used on which class
of fire:
Oxygen feeds fire - Answer Windows should be closed during a fire because:
stand 8 ft away from the fire - Answer When using an extinguisher, you should:
Report it imminently - Answer If a leak is discovered you should:
Gauge, seal, nozzle, and rock it. - Answer Three Check and a rock rule:
- yrs - Answer Extinguishers should be tested by a tech every:
- / 1