1
NORA Oil Heat Exam Review Questions and Answers | Latest Version | 2025/2026 | Correct & Verified
What should be done after an oil burner runs out of fuel?
- Increase the draft in the chimney
- Adjust the barometric damper
- Replace the burner motor
✔✔B. Bleed the fuel line to remove trapped air
What component detects the presence of a flame in an oil burner?
- High-limit switch
- Barometric damper
- Heat exchanger
✔✔C. Cad cell
What is the function of a barometric damper in a venting system?
- To reduce burner noise
- To clean combustion gases 1 / 3
2
✔✔C. To regulate draft and improve combustion efficiency
- To control fuel flow
What color should a properly adjusted oil burner flame be?
- Blue with white edges
- Dark orange with visible smoke
- Red with flickering black soot
✔✔C. Bright yellow-white with minimal smoke
What can cause excessive soot buildup in an oil-fired heating system?
- High-quality fuel oil
- A properly sized burner nozzle
- A new air filter
✔✔B. Incorrect air-to-fuel ratio
Why should an oil filter be replaced regularly?
- To reduce noise from the burner
✔✔B. To prevent clogs and maintain steady fuel flow 2 / 3
3
- To improve the draft in the chimney
- To decrease combustion air
What happens if a nozzle becomes clogged in an oil burner?
- The burner will shut down immediately
- The burner will produce more heat
- The draft will automatically increase
✔✔B. The flame will become unstable, leading to poor combustion
Which safety device shuts off the oil supply if a flame is not detected?
- High-limit switch
- Transformer
- Aquastat
✔✔B. Primary control
Why is preheating oil necessary in extremely cold climates?
- To increase fuel pressure
- To burn the fuel at a higher temperature
- / 3