- | P a g e
PA MOTOR VEHICLE DAMAGE APPRAISER’ S LICENSE
EXAM NEWEST 2024 ACTUAL EXAM COMPLETE 200
QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+
What component forms the housing for the rear wheels?
a) Quarter panels
b) Quarter wheelhouses
c) Sail panels
d) Fenders - ANSWER- b) Quarter wheelhouses
Moldings that are positioned just below the window openings are called_____ moldings.
a) Belt
b) Wheel opening
c) Side
d) Trim - ANSWER- a) Belt
A car's quarter panel would NOT include which of the following components?
a) The cowl 1 / 4
- | P a g e
b) Wheel opening, side or belt moldings
c) Side marker lamp
d) Fuel door - ANSWER- a) The cowl
What component forms the rear side of the automobile?
a) Pillars
b) Quarter panels
c) Fenders
d) Quarter wheelhouses - ANSWER- b) Quarter panels
The fabric or cardboard-like lining that covers the inner roof panel and roof bows is called the
a) Vibration damper
b) Scalp molding
c) Headliner
d) Insulator pad - ANSWER- c) Headliner
What component found below the rear window on the inside of the vehicle serves as a shelf and provides internal bracing?
a) Firewall
b) Rear lower body panel
c) Rear upper body panel 2 / 4
- | P a g e
d) Rear package shelf - ANSWER- d) Rear package shelf
What component combines the deck lid and stationary back glass into a single assembly that lifts up like a deck lid?
a) Sail panel
b) Tail panel
c) Hatchback
d) Fender - ANSWER- c) Hatchback
Where is the rear lower body panel located?
a) Between the deck lid and the rear bumper
b) Below the rear window on the inside of the vehicle
c) Between the deck lid and the rear window
d) Between the deck lid and the rear package shelf - ANSWER-
a) Between the deck lid and the rear bumper
The bottom of the window glass fits into a component called the
a) Run channel
b) Sash channel
c) Window regulator
d) Edge guard - ANSWER- b) Sash channel
- / 4
- | P a g e
Where are the rear doors mounted on four-door cars?
a) Hinge pillars
b) Center pillars
c) Door pillars
d) Quarter panels - ANSWER- b) Center pillars
The sides of the window glass travel in components called
a) Run channel
b) Edge guards
c) Window regulators
d) Sash channels - ANSWER- a) Run channel
Slots, holes, dimples and other dents are built into unibody panels to protect the vehicle from the energy of a collision.These areas are called
a) Unirails
b) Crush zones
c) Torque boxes
d) Energy absorbers - ANSWER- b) Crush zones
Which one of the following components is NOT part of a unibody structure?
- / 4