S-56 Test - Part 1 Roles and Responsibilities Latest Update 2024 Version Questions and Verified Correct Answers Guaranteed A+
- CORRECT ANSWER: Frequency - (Note: Asbestos and containment projects only). If
the project area is greater than 15,000 square feet on any given floor, the installation of a negative air cut off switch or switches shall be required at a single location outside the work place, such as inside a stair well, or at a secured location in the ground floor lobby,
3 years - CORRECT ANSWER: How long is a certificate of fitness valid?
After failed biweekly inspection - CORRECT ANSWER: Frequency - Standpipe
repaired and retested until retesting is successful after failed bi-weekly test by licensed plumber/fire suppression subcontractor. Repairs documented.
After major changes - CORRECT ANSWER: Frequency - (Best Practices) Local FDNY
unit familiarized with project.
All equipment is readily available, inspected, tested, and maintained - CORRECT ANSWER: What four things do fire safety managers have to ensure in regards to onsite fire protection equipment?
Annually - CORRECT ANSWER: Frequency - Fire extinguisher inspections completed
by FDNY certified individual.
Any representative of the FDNY - CORRECT ANSWER: Who can check review the
inspection logs of a Fire Safety Manager?
As needed - CORRECT ANSWER: Frequency - (Best Practices) In the event of fire or any emergency, the CSFSM will meet the first responders at the front gate.
As needed - CORRECT ANSWER: Frequency - Develop and maintain at the
construction site the pre-fire plan.
As needed - CORRECT ANSWER: Frequency - The CSFSM shall ensure that
construction site personnel are familiar with the operation of portable fire extinguishers and other fire protection equipment.
At all times - CORRECT ANSWER: How often does a fire safety manager have to be
present during construction, demolition, and alteration work?
At least a daily basis - CORRECT ANSWER: What is the minimum requirement for fire safety managers pertaining to fire safety inspections of the construction site?
- / 2
Before performing any hot work - CORRECT ANSWER: Frequency - (Best Practices)
Hot works training provided to tradespersons involved in welding, burning, grinding, braising, or other fire guard operations. Acknowledgements of this orientation signed by each trainee.
Bound Log Book - CORRECT ANSWER: How does a fire safety manager record their
inspections?
Certificate of Fitness (C of F) - CORRECT ANSWER: A written statement issued by
the NYC Fire Department certifying that the person to whom it is issued has passed an examination as to his or her qualifications, or is otherwise deemed qualified to conduct or supervise an operation, or supervise a facility for which such certificate is required by this code or the rules.
Daily - CORRECT ANSWER: Frequency - (Best Practices) FDNY first responders box
maintenance and execution of evacuation drills.
Daily - CORRECT ANSWER: Frequency - (Best Practices) First Responder's Box
contains Emergency Contact Numbers, FDNY permits, floor by floor logistics plans indicating access/egress routes, enlarged first floor evacuation plan, standpipe riser diagram, Daily Log & Checklist Binder(Emergency Contacts, FDNY/CSFSM Daily Log, & Fire Notification Guidelines), Standpipe Inspection Log, caution tape.
Daily - CORRECT ANSWER: Frequency - A fire guard (F-60/F-93/F-29) shall perform
patrols from 1600 to 2400.
Daily - CORRECT ANSWER: Frequency - A fire guard (F-60/F-93/F-30) is required at each hot work operation while in progress and shall continue on site for a minimum of 30 minutes after each hot work operation is complete. A log book shall be maintained onsite.
Daily - CORRECT ANSWER: Frequency - A fire guard (F-60/F-93/F-30) shall be
assigned one floor below hot work operations for fire exposures that are not observable by the fire guard on the floor above.
Daily - CORRECT ANSWER: Frequency - A Hot Works permit log shall be onsite.
Daily - CORRECT ANSWER: Frequency - Construction drawings used to confirm
routing of unexposed standpipe sections.
Daily - CORRECT ANSWER: Frequency - Ensuring compliance with the Fire Safety
Managers Code FC 1408.1
Daily - CORRECT ANSWER: Frequency - FDNY/CSFSM Daily Reports must be kept
by CSFSM documenting standpipe inspections, fire extinguisher inspections, and upkeep of permit logs.
- / 2