STSC Exam Study Cards with Correct Solutions 100% Verified 2024/2025.STSC - Correct Answers Safety Trained Supervisor in Construction OHSMS - Correct Answers Occupational Health and Safety Management Systems Management Leadership - Correct Answers Establish clear safety and health objectives for the OHSMS and operationally define the actions needed to achieve those objectives When in use, electrical power tools and cords must: - Correct Answers Make use of ground fault circuit interrupters or be a part of an assured grounding conductor program If a supervisor is given authority by the general manager to stop operations site whenever he or she observes an imminent danger situation. The following correctly identifies that authority... - Correct Answers Functional authority A certified Safety Trained Supervisor is expected to... - Correct Answers seek methods to improve your knowledge and understanding of methods, techniques and practices for protection of workers.STS Code of ethics Arrange the following hazard control steps in the most appropriate sequence: (1) guard hazard, (2) engineer out hazard, if possible, (3) educate personnel - Correct Answers 2-engineer out the hazard if possible, 1-guard hazard, 3-educate personnel Which action is preferred when dealing with minor infractions of work safety rules? Oral reprimand, Written reprimand, No response or consequence, suspension - Correct Answers Oral reprimand System safety analysis can be applied to... - Correct Answers Any system that has interacting components What should a supervisor do when a crew must walk across an area with open floor holes to go to their work area? - Correct Answers Have the floor holes covered and inform crew of load surface restrictions The strongest motivator, according to contemporary motivation theory is... - Correct Answers Recognition of achievement for performance 1 / 2
Management has increased work hours and is punishing for more productivity. As STS, you are concerned about some of the safety risks associated with this production schedule. You should... - Correct Answers Inform/communicate increased hazards due to increased production and verify that risk is acceptable The best evaluation of tasks descriptor involving steps, hazards and solutions is... - Correct Answers Job Safety Analysis (JSA) What minimum PPE is required for a worker in a grinding operation... - Correct Answers Eye and face protection Minimally,_______authorized attendant(s) shall be on duty outside of the space during permit required confined space operations and shall be responsible for securing immediate aid, keeping an accurate count of entrants in case of emergency. - Correct Answers One A medical questionnaire required when safety workers place an employee in respiratory protection must be evaluated by whom? - Correct Answers A licensed health care professional aka (PLHCP) physician or other licensed health care professional In construction, each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is _______feet or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems or personal fall arrest systmes - Correct Answers 6 feet A crew member deliberately violates a safety procedure. What should be done? - Correct Answers Stop work, write formal complaint and explain Each employee on a scaffold more than_____feet above a lower level shall be provided with fall protection to prevent from falling to a lower level - Correct Answers 10 feet Professional ethics refers to - Correct Answers A set of principles and standards that guide the actions of professionals that are often referenced in civil or criminal cases involving professional conduct When working on a scaffold 20 feet high who must approve the scaffold for use? - Correct Answers The competent person
- / 2