STSC Exam Study Guide Latest Update 2025-

Study Guides Aug 26, 2025
Loading...

Loading document viewer...

Page 0 of 0

Document Text

STSC Exam Study Guide Latest Update 2025- 2026 160 Questions and 100% Verified Correct Answers Guaranteed A+

A bench grinder should have the tool rest adjusted to within_____inch of the wheel, and the tongue guard should be adjusted to within_____inch of the wheel - CORRECT ANSWER: tool rest within 1/8 inch of the grinding wheel, and 1/4 inch of the wheel

A break in elevation of ______ requires that either steps, ramps, or ladders must be

provided - CORRECT ANSWER: 19 inches

A certified Safety Trained Supervisor is expected to... - CORRECT ANSWER: seek

methods to improve your knowledge and understanding of methods, techniques and practices for protection of workers. STS Code of ethics

A container for gasoline should be: - CORRECT ANSWER: Metal with UL specified non- spill cap

A crew member deliberately violates a safety procedure. What should be done? -

CORRECT ANSWER: Stop work, write formal complaint and explain

A CSP and licensed professional engineer asks a supervisor to informally review a series of fall protection plans for a warehouse construction project. The supervisor has adequately reviewed these types of plans for years, although without an engineering degree or formal fall protection system design education. Which statement most represents a reasonable interpretation of the STS Code of Ethics? - CORRECT

ANSWER: The STS Code of Ethics permits STSs to engage in work when they are

qualified by experience in the specific technical fields involved, as well as by education.

A guardrail system's MAJOR components include? - CORRECT ANSWER: Top rails,

mid rails, toe boards 1 / 3

A medical questionnaire required when safety workers place an employee in respiratory

protection must be evaluated by whom? - CORRECT ANSWER: A licensed health care

professional aka (PLHCP) physician or other licensed health care professional

A modern management approach to the success of a long-term safety management

system is known as... - CORRECT ANSWER: Team-based

A respirator with filter, cartridge, or canister element that removes specific air

contaminants is termed - CORRECT ANSWER: An air-purifying respirator

A safety inspector observes the back of a rough terrain forklift tip is a heavy load is being lifted on a job site. The best course of action is... - CORRECT ANSWER: do not continue with this lift

A skin cancer caused by sunlight exposure is call - CORRECT ANSWER: Melanoma

A standard railing shall consist of top rail, intermediate rail, and posts, and shall have a vertical height of ______ inches nominal from upper surface of top rail to floor, platform,

runway, or ramp level - CORRECT ANSWER: 42

A supervisor's company has hired a new worker who was qualified as a powered truck operator at her previous company. What is the training required to get this person qualified as a power truck operator in the company? - CORRECT ANSWER: Ensure the operator has knowledge and skills required to operate power trucks, including company's procedures

A team member working outside in 32F cold weather. You see the person fall from a 12- foot step ladder and is lying unconscious. After sending someone for help, which best

describes the BEST course of action? - CORRECT ANSWER: Do not move the injured

person; check if the injured worker is breathing and assess for other injuries.

  • / 3

A worker arrives at work with his own sunglasses stating they are "safe enough", Supervisor should look for: - CORRECT ANSWER: Markings for ANSI Z87 on frame (and lens)

A worker arrives on site with own PPE. Who is responsible to ensure the PPE is

appropriate for the job? - CORRECT ANSWER: Employer

A worker complains of feeling ill after an unknown layer of coating was found during a

grinding operation. The Supervisor should - CORRECT ANSWER: Stop work until the

coating can be identified

Accident analysis is PRIMARILY used as a(n)? - CORRECT ANSWER: Indicator of

problem areas

Accident costs such as loss in earning power, loss of time by supervision, damage to tools and equipment, and cost of training a new worker are also called - CORRECT

ANSWER: Indirect costs

All instruction manuals & operating procedure books for new equipment has been read by the STS. Upon completion of reading what should be done with them? - CORRECT

ANSWER: Communicate the information to the affected workers

All lanyards and vertical lifelines have a minimum breaking strength of _______ pounds

per worker - CORRECT ANSWER: 5000 pounds

All the following are required on a confined space permit EXCEPT (permit space to be entered, purpose of entry, name of CEO, date and the authorized duration of the entry

permit) - CORRECT ANSWER: The name of the CEO or President

An employee without eye protection, is observed installing parts at a bench. This is not a hazardous operation, but it is a posted "eye protection" area. Which of the following is

  • / 3

Download Document

Buy This Document

$30.00 One-time purchase
Buy Now
  • Full access to this document
  • Download anytime
  • No expiration

Document Information

Category: Study Guides
Added: Aug 26, 2025
Description:

STSC Exam Study Guide Latest Update 2025- 2026 160 Questions and 100% Verified Correct Answers Guaranteed A+ A bench grinder should have the tool rest adjusted to within_____inch of the wheel, and ...

Get this document $30.00